This is the test report of using an OBDII method to program a key with a OBDSTAR X300 DP pad for 2013 toyota RAV4 all key lost with G chip

 

Prepared two keys to do all key lost, the left master, the right one with a G chip to be programmed

Power on obdstar X300 DP tablet

Select Diagnosis in the main menu

In IMMOBILIZER, select Type 2 (with G chip 72)

Communication…

This is the G chip

Select All key lost

Communication…

Switch ignition off

Switch ignition on

Communication…

Switch ignition off and remove the key

Configuring the system, please wait…

Switch ignition on

Configuring the system, please wait…

Switch ignition off and remove the key

The system pops up the tutorial of key programming through Obdstar X300 DP:

“program keys as the following steps within 120 seconds:

A: program 2 master keys and 1 sub key

1- program the first master key, turn on the ignition and wait for 5 seconds

2- insert the second master key,  turn on the ignition  switch and wait for 5 seconds

3- insert the third sub key,  turn on the ignition  switch and wait for 5 seconds. The security light turns off and programming is finished.

 

B: program 1 master key (here, we should follow this guide)

1- insert the first master key, turn ignition on  and wait for 5 seconds”

2- insert the second sub key, turn on the ignition  switch and wait for 5 seconds

3- turn on the ignition switch quickly for 5 times.  The security light turns off and programming is finished.

 

C: program 1 master key:

1- insert the master key, turn on the ignition switch and wait for 5 seconds

2- turn on the ignition switch quickly for 5 times. The security light turns off and programming is finished.”

OBDSTAR x300 DP Key Programmer does all key lost with G chip through OBDII successfully!